| 1. |
Do not clean the coated surface for at least 7 days for automotive applications and 30 days for all other applications after the coating. This is to ensure that the adhesive completely bonds to the windows. |
|
| 2. |
For automotive applications, do not wind down the windows for at least 48 hours after coating. |
|
| 3. |
Do not use alcohol/ammonia based solutions or abrasives to clean the coated windows. Use lukewarm water and wipe off lightly with a clean cloth. |
|
| 4. |
Do not put on stickers or adhesive materials of any kind on the coating. |
|
| 5. |
Do not pick at the edges of the coating. This will cause delaminating or peeling. |
|
| 6. |
A little “misty look” may appear just after coating. This is normal and would vanish within 4 to 10 weeks. Similarly, tiny water bubbles (if any) would also disappear. |
|
| 7. |
Thin splice lines may be visible on curved windows, which require 2 or more sections of coating for full coverage. |
|
| 8. |
Do not switch on the rear defogger within the first week of installation. |
|
+919341915161
+918026721426